Optimizing Sample Extraction for PFAS analysis

by | Apr 25, 2022

The quantification of PFAS from environmental samples is a complicated undertaking due to the high levels of contamination typically observed in most laboratories.
AgilentWeb_040522_WebHeader_OND

BradClarke_200Separation Science, in collaboration with Agilent, offers an on-demand symposium covering new methods in PFAS testing, featuring thought leaders from across the globe. One key talk available to watch is 'Optimizing Water, Soil, and Serum Sample Extraction for PFAS analysis' given by Dr Bradley Clarke (Senior Lecturer in Environmental Science and Analytical Chemistry, University of Melbourne, Australia). Below is an outline of the presentation:

Format: On-demand Presentation

Overview:
The quantification of PFAS from environmental samples is a complicated undertaking due to the high levels of contamination typically observed in most laboratories. Sample preparation and extraction are critical aspects of any workflow for PFAS analysis and demands a serious level of attention, like the LCMS operation. In this talk, I provide an overview of the sample extraction processes for the extraction of PFAS from water, soil, and serum, including steps taken to reduce sample volume without sacrificing limits of quantification.

By watching this presentation you will learn about:

  • Common techniques used for water analysis using solid-phase extraction (SPE).
  • Approaches for minimising sample volume and use of costly internal standards.
  • Workflows for the quick extraction of PFAS from solid matrices.

Register to watch this presentation by clicking on the button below:

In addition, you'll gain access to a series of presentations unique to this on-demand symposium:

AddPres_ChenLatest Regulations & Standards on PFAS Testing in the Materials Industry
Dr Yuhong Chen (Global Materials Segment, Applied Markets, Agilent Technologies)

AddPres_GilSampling and Analysis of Volatile PFAS in Air by TD-GC-MS
Carlos Gil (Business Development Manager, Markes International GmbH)

AddPres_BaumannStreamlined PFAS Annotation and Visualization with FluoroMatch Flow and Visualizer
Stephen Baumann (Application Applied Segment Manager, Agilent Technologies)

AddPres_ThaxtonUsing Thermal Desorption and GC-MS/MS for the Analysis of PFAS Compounds in Air for Improved Detectability & Reliability
Kurt Thaxton (Gerstel)

Related Content

Advertisment

Advertisment

Advertisement